|
Meetings And Conferences: 2007 NACE: I-CAR Classes
Two NEW I-CAR Classes Premiering at NACE 2007
Register online today for two new classes making their debut at NACE 2007. Steel Unitized Structures Technologies and Repair (SPS07) focuses on the latest steel repair and replacement considerations. Steel Full-Frame Technologies and Repair (SPS08) will identify trends, issues, and vehicle maker repair recommendations for full-frame steel designs. These training programs are available at the reduced rate of $75 per class and are sure to sell out quickly. All nine classes will be conducted on Wednesday, October 31 and Saturday, November 3.
Wednesday, October 31, 2007
8 a.m. - 12 noon
- Steel Unitized Structures Technologies and Repair (SPS07) NEW!
- Understanding Unibody Design Technologies and Construction
- Identifying Advanced High Strength Steel Considerations
- Understanding Structural Part Repair Considerations
- Replacing Structural Parts
- Identifying Partial Replacement Considerations
- Squeeze-Type Resistance Spot Welding (WCS04)
- Squeeze-Type Resistance Spot Welding (STRSW) Process
- Using STRSW Equipment
- How Resistance Spot Welds are Made, Visually Inspected, and Destructively Tested
- Weld Bonding Process
- Automotive Foams (FOM01)
- Overview of Automotive Foam
- Structural Foam Considerations
- Removing Expandable Foam
- Choosing Replacement Expandable Foam
- Installing Expandable Foam
- Working Safely Around Foam
Wednesday, October 31, 2007
1 - 5 p.m.
- Steel Full-Frame Technologies and Repair (SPS08) NEW!
- Identifying Trends in Full-Frame Vehicle Design and Construction
- Identifying Issues Related to Full-Frame Repair
- Repairing Full-Frame Damage Following Vehicle Maker’s Procedures
- Repairing Unitized Body Damage Following Vehicle Maker’s Procedures
- Replacing Aluminum Exterior Panels (PRA01)
- Identifying Bolted and Adhesively Bonded Parts
- Identifying and Repairing Riveted and Rivet-Bonded Panels
- Repairing Hemmed and Clinched Panels
- Repairing Welded Panels
- Adhesive Bonding (ADH01)
- Removing Panels and Flange Cleaning
- Preparing Adhesive for Application
- Using Adhesives for Panel Attachment
- Understanding Working Times and Cure Times
Saturday, November 3, 2007
8 a.m. - 12 noon
- Steel Unitized Structures Technologies and Repair (SPS07) NEW!
- Understanding Unibody Design Technologies and Construction
- Identifying Advanced High Strength Steel Considerations
- Understanding Structural Part Repair Considerations
- Replacing Structural Parts
- Identifying Partial Replacement Considerations
- Squeeze-Type Resistance Spot Welding (WCS04)
- Squeeze-Type Resistance Spot Welding (STRSW) Process
- Using STRSW Equipment
- How Resistance Spot Welds are Made, Visually Inspected, and Destructively Tested
- Weld Bonding Process
- Stationary Glass (GLA02)
- Stationary Glass Issues
- Understanding Windshield Construction
- Preparing the Pinchweld
- Selecting Adhesives
- Repairing Minor Glass Damage
Earn points towards the Gold Class Professionals and Platinum Individual training designations by completing an I-CAR Live training program at NACE 2007.
Participants may sign up for I-CAR training programs as part of their NACE registration by visiting the NACE web site at www.naceexpo.com or by calling 866.860.1962. Participants may also sign up for I-CAR training programs separate from NACE registration.
|
